et-4rtd-4di2 ethertrak ? ethernet i/o sixnet automation series industrial ethernet i/o module sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm 100 ohm platinum rtd inputs select the et-4rtd-4di2 when you need to monitor both 100 ohm platinum rtd and discrete inputs (alarm limits, switches, etc.) over an ethernet network. et-4rtd-4di2 product highlights ? 16 bit differential inputs reduce noise and ground loops ? rtds are more accurate than thermocouples ? rtd linearization done in software for high accuracy ? four discrete inputs for monitoring or counting performance specifications ? 4 rtd inputs ? rtd type, 100 ohm platinum, alpha = .00385 or .00392 ? compatible lead con ? gurations 2, 3, or 4 wire ? input range -200 to 850c ? 16 bits a/d resolution ? scaled resolution 0.1c ? full scale accuracy (@20c) 0.5c ? span & offset temp. coef ? cient +/- 25 ppm/c ? excitation current (pulsed to reduce self-heating) 250 ua ? max. lead wire resistance 100 ohms per side, balanced ? input protection +/- 25 vdc ? fastest scan rate (4 rtds) 700 ms ? fastest scan rate (4dis) 2 ms ? number of discrete inputs 4 ? nominal discrete input range 12/24 vdc/vac ? discrete input characteristics same as et-16di2 ? filtered mode on/off delay 25 ms ? filtered mode count feature 10 hz maximum ? fast mode count feature 100 hz max (2 khz on channel 1) ? required supply voltage 10-30 vdc (0.75 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information eT-4RTD-4DI2-U 4 rtd and 4di with wiring base et-4rtd-4di2-m replacement module only product datasheet all speci ? cations are subject to change. consult factory for latest info. datasheet et-4r td-4di2 may 20, 2009 as the global experts in communication, monitoring and control for industrial automation and networking, red lion has been delivering innovative solutions for over forty years. our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. product brands include red lion, n-tron and sixnet. with headquarters in york, pennsylvania, the company has offces across the americas, asia-pacifc and europe. for more information, please visit www.redlion.net. red lion is a spectris company. www.redlion.net connect. monitor. control. adld0168 090913 ?2013 red lion controls americas sales@redlion.net asia-pacifc asia@redlion.net europe middle east africa europe@redlion.net +1 (717) 767-6511 sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm 100 ohm platinum rtd inputs select the et-4rtd-4di2 when you need to monitor both 100 ohm platinum rtd and discrete inputs (alarm limits, switches, etc.) over an ethernet network. et-4rtd-4di2 product highlights ? 16 bit differential inputs reduce noise and ground loops ? rtds are more accurate than thermocouples ? rtd linearization done in software for high accuracy ? four discrete inputs for monitoring or counting performance specifications ? 4 rtd inputs ? rtd type, 100 ohm platinum, alpha = .00385 or .00392 ? compatible lead con ? gurations 2, 3, or 4 wire ? input range -200 to 850c ? 16 bits a/d resolution ? scaled resolution 0.1c ? full scale accuracy (@20c) 0.5c ? span & offset temp. coef ? cient +/- 25 ppm/c ? excitation current (pulsed to reduce self-heating) 250 ua ? max. lead wire resistance 100 ohms per side, balanced ? input protection +/- 25 vdc ? fastest scan rate (4 rtds) 700 ms ? fastest scan rate (4dis) 2 ms ? number of discrete inputs 4 ? nominal discrete input range 12/24 vdc/vac ? discrete input characteristics same as et-16di2 ? filtered mode on/off delay 25 ms ? filtered mode count feature 10 hz maximum ? fast mode count feature 100 hz max (2 khz on channel 1) ? required supply voltage 10-30 vdc (0.75 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information eT-4RTD-4DI2-U 4 rtd and 4di with wiring base et-4rtd-4di2-m replacement module only product datasheet all speci ? cations are subject to change. consult factory for latest info. datasheet et-4r td-4di2 may 20, 2009 sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm 100 ohm platinum rtd inputs select the et-4rtd-4di2 when you need to monitor both 100 ohm platinum rtd and discrete inputs (alarm limits, switches, etc.) over an ethernet network. et-4rtd-4di2 product highlights ? 16 bit differential inputs reduce noise and ground loops ? rtds are more accurate than thermocouples ? rtd linearization done in software for high accuracy ? four discrete inputs for monitoring or counting performance specifications ? 4 rtd inputs ? rtd type, 100 ohm platinum, alpha = .00385 or .00392 ? compatible lead con ? gurations 2, 3, or 4 wire ? input range -200 to 850c ? 16 bits a/d resolution ? scaled resolution 0.1c ? full scale accuracy (@20c) 0.5c ? span & offset temp. coef ? cient +/- 25 ppm/c ? excitation current (pulsed to reduce self-heating) 250 ua ? max. lead wire resistance 100 ohms per side, balanced ? input protection +/- 25 vdc ? fastest scan rate (4 rtds) 700 ms ? fastest scan rate (4dis) 2 ms ? number of discrete inputs 4 ? nominal discrete input range 12/24 vdc/vac ? discrete input characteristics same as et-16di2 ? filtered mode on/off delay 25 ms ? filtered mode count feature 10 hz maximum ? fast mode count feature 100 hz max (2 khz on channel 1) ? required supply voltage 10-30 vdc (0.75 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% rs485 port for i/o expansion ? 32 max. rs485 stations (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information eT-4RTD-4DI2-U 4 rtd and 4di with wiring base et-4rtd-4di2-m replacement module only product datasheet all speci ? cations are subject to change. consult factory for latest info. datasheet et-4r td-4di2 may 20, 2009 3.6k 3.6k sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm analog inputs and outputs select the et-8ai2-4ao2 when you need a mix of 4-20 ma analog inputs and outputs at the same location. et-8ai2-4ao2 product highlights ? single compact solution for small stations ? lowest cost for small analog applications ? input/output combination is ideal for control ? ethernet or rs485 modbus capability performance specifications ? 8 analog inputs ? analog input range 4-20 ma ? analog input resolution 14 bits (0.01%) ? analog input characteristics same as et-16ai2 ? 4 of analog outputs ? output range 4-20 ma ? 16 bits d/a resolution (less than 1 a) ? full scale accuracy (@20c) +/- 0.02% ? span and offset temp. coef ? cient +/- 50 ppm per c typical ? max. output settling time (to 0.05%) 5 ms ? required user supplied voltage 10-30 vdc ? load resistance range (@ +24 vdc supply) 0-750 ohms ? short circuit protection current limiting ? fastest scan rate (all channels) 5 ms ? required supply voltage 10-30 vdc (0.75 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% rs485 port for i/o expansion ? 32 max. rs485 station (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information et-8ai2-4ao2-h 8ai and 4ao with wiring base et-8ai2-4ao2-m replacement module only product datasheet all speci ? cations are subject to change. consult factory for latest info. datasheet et -8ai2-4ao2 may 20, 2009 sixnet technology park ? 331 ushers road ? ballston lake, ny 12019 ? usa 1.518.877.5173 ? fax 1.518.877.8346 ? sales@sixnet.com solutions for your industrial networking challenges www.sixnet.com ethertrak tm analog inputs and outputs select the et-8ai2-4ao2 when you need a mix of 4-20 ma analog inputs and outputs at the same location. et-8ai2-4ao2 product highlights ? single compact solution for small stations ? lowest cost for small analog applications ? input/output combination is ideal for control ? ethernet or rs485 modbus capability performance specifications ? 8 analog inputs ? analog input range 4-20 ma ? analog input resolution 14 bits (0.01%) ? analog input characteristics same as et-16ai2 ? 4 of analog outputs ? output range 4-20 ma ? 16 bits d/a resolution (less than 1 a) ? full scale accuracy (@20c) +/- 0.02% ? span and offset temp. coef ? cient +/- 50 ppm per c typical ? max. output settling time (to 0.05%) 5 ms ? required user supplied voltage 10-30 vdc ? load resistance range (@ +24 vdc supply) 0-750 ohms ? short circuit protection current limiting ? fastest scan rate (all channels) 5 ms ? required supply voltage 10-30 vdc (0.75 watt typical) ? operating temperature range -30 to 70 c ? storage temperature range -40 to 85 c ? humidity (non-condensing) 5 to 95% rs485 port for i/o expansion ? 32 max. rs485 station (up to 512 i/o) ? baud rate: 38,400 bps ? recommended distance of up to 0.5 mile ? protocol: sixnet ?i/o for windows?, modbus ascii & rtu ? isolation (from ethernet port) 1200 volts rms 1 minute ordering information et-8ai2-4ao2-h 8ai and 4ao with wiring base et-8ai2-4ao2-m replacement module only product datasheet all speci ? cations are subject to change. consult factory for latest info. datasheet et -8ai2-4ao2 may 20, 2009
|
